Step 1:
Attach vacuum hose and pole to vacuum head. Submerge unit in pool.
step1

Step 2:
Hold other end of hose over water return. Hose will fill with water, driving out all air trapped in hose.
step2

Step 3:
While holding hose below water, place the vacuum plate into the skimmer, leaving the leaf basket in place. Quickly attach hose to elbow fitting*. You are now ready to vacuum.
step3

*Note: If your skimmer was not supplied with an elbow fitting, simply take off the skimmer cover and put the vacuum hose directly on to the vacuum plate.

Filter_Chart-01

*These operating instructions are only a basic guide. For further information including winterizing instructions refer to the owners manual supplied with the filter.